Summary
Product features
Related cases

Full Function:
CA series lathe is capable of performing turning operations including facing various materials, internal and external cylinder, conic surfaces and other rotary surfaces. It can also be applied to finishing machining of various threads of Metric, Whitworth, modular and diametral pitches. It can also perform operations of drilling, reaming, cutting oil grooves with ease.
A series conventional lathes are equipped with front spindle bearing with large diameters. It incorporate widened bed span compared with con-generic products so as to achieve a relatively high constructional rigidity and upgraded

CA series products are complete in full range of specifications covering various categories including straight lathe beds, gaptype lathe beds, and spindle bore lathe.
It can undertake not only turning of end face, inside and outside cylinder surface, taper and other rotating surface in a variety of materials, but also accurate processing of kinds of metric, inch, modulus, joint thread. Drilling, reaming, broaching groove and other work can be easily competent too.

Conventiona Lathe CA-B

Introduction:

Technical parameters:

Item		Unit	CA6140A	CA6240A	CA6150A	CA6250A	CA6161A	CA6261A
Max. swing diameter over bed		mm	400		500		610
Max. swing diameter over carriage		mm	210		300		370
Swing dia. over gap /width of gap		mm	--	630×210	--	720×210	--	830×210
Max. turning length of bed		mm	1000/900;1500/1400; 2000/1900		1000/900;1500/1400; 2000/1900; 3000/2900		1000/900;1500/1400; 2000/1900; 3000/2900
Section of turning tools		mm	25×25		25×25		25×25
Width of bed / hardness		mm	400 / RC52		400 / RC52		400 / RC52
Spindle speed range (Forward)		r/min	11-1600 (24kinds)		11-1600 (24kinds)		11-1600 (24kinds)
Spindle speed range(Reverse)		r/min	14-1580 (12kinds)		14-1580 (12kinds)		14-1580 (12kinds)
Spindle bore and nose		mm	52,A6		52,A6		52,A6
Inner taper of spindle nose			Morse No. 6		Morse No. 6		Morse No. 6
Scope of threads	Metric	mm	1-192 (44kinds)		1-192 (44kinds)		1-192 (44kinds)
	Whitworth	t.p.i	2-24 (21kinds)		2-24 (21kinds)		2-24 (21kinds)
	Module	mm	0.25-48 (39kinds)		0.25-48 (39kinds)		0.25-48 (39kinds)
	Dimetral	D.P	1-96 (37kinds)		1-96 (37kinds)		1-96 (37kinds)
Longitudinal feed of spindle per revolution (64 feeds)	Normal	mm/r	0.08-1.59		0.08-1.59		0.08-1.59
	Fine		0.028-0.054		0.028-0.054		0.028-0.054
	Coarse		1.71-6.33		1.71-6.33		1.71-6.33
Cross feed of spindle per revolution (64 kinds)	Normal	mm/r	0.04-0.79		0.04-0.79		0.04-0.79
	Fine		0.014-0.027		0.014-0.027		0.014-0.027
	Coarse		0.86-3.16		0.86-3.16		0.86-3.16
Travel of cross slide / compound slide		mm	320 / 140		320 / 140		420 / 140
Swing angle of compound slide			± 90°		± 90°		± 90°
Rapid travel of carriage		m/min	4		4		4
Rapid travel of cross slide		m/min	2		2		2
Travel of tailstock spindle		mm	150		150		150
Diameter of tailstock spindle		mm	75		75		75
Taper of tailstock spindle			Morse No. 5		Morse No. 5		Morse No. 5
Main motor		kW	7.5		7.5		7.5
Machine weight (Net weight)	1000mm	kg	2070 kg		2140 kg		2260kg
	1500mm		2220 kg		2290 kg		2437 kg
	2000mm		2570 kg		2640 kg		2787kg
	3000mm		3080 kg		3150 kg		3200 kg
Overall dimensions (L×W×H)	1000mm	mm	2668×1000×1267		2668×1037×1312		2668×1130×1367
	1500mm		3168×1000×1267		3168×1037×1312		3168×1130×1367
	2000mm		3668×1000×1267		3668×1037×1312		3668×1130×1367
	3000mm		4668×1037×1312		4668×1037×1312		4668×1130×1367

the previous Back to list next

Related product recommendation

Conventiona Lathe CA-B

Introduction:

Technical parameters: