+86-138-4055-8370 National Service Hotline
SL360 series adopts integral inclined bed, integral sleeve spindle, sleeve type hydraulic tailstock, integral external protection and independent internal protection system. It is a full-function horizontal CNC lathe with high quality, high reliability and high-cost performance. In the design, we make improvements on the structure of spindle, bed, saddle, tailstock and other parts. The main castings are secondary tempering to remove the internal stress. Higher precision standards and quality standards greatly improve the rigidity, reliability and cutting stability of the machine.
It adopts 30° inclined bed flat guideway structure, enhance the overall rigidity of the machine, cutting force is more stable.
Enlarged chip discharging hole, to ensure smooth chip discharging on the machine.
Sleeve type integral spindle unit and large span symmetrical headstock structure has the characteristics of uniform heat dissipation, small thermal offset, stable precision and strong rigidity.
And it is equipped with Taiwan 8-inch hollow hydraulic chuck.
SL360 series adopts integral inclined bed, integral sleeve spindle, sleeve type hydraulic tailstock, integral external protection and independent internal protection system. It is a full-function horizontal CNC lathe with high quality, high reliability and high-cost performance. In the design, we make improvements on the structure of spindle, bed, saddle, tailstock and other parts. The main castings are secondary tempering to remove the internal stress. Higher precision standards and quality standards greatly improve the rigidity, reliability and cutting stability of the machine.
<
| Item | Unit | T2C | |
| Max. swing over bed | mm | 560 | |
| Max. turning length | mm | 500/1000 | |
| Max. turning diameter | mm | 320 | |
| Max. swing over cross slide | mm | 350 | |
| Spindle nose | A2-6 | ||
| Spindle bore | mm | 65 | |
| Bar capacity | mm | 50 | |
| Spindle speed range | r/min | 30-4500 | |
| Main motor output power (30 mins./Rated) | kW | 15/11 | |
| Spindle output torque | N.m | 235 | |
| Chuck diameter | inch | 8” | |
| X-axis rapid speed | m/min | 30 | |
| Z-axis rapid speed | m/min | 30 | |
| X-axis travel | mm | 210 | |
| Z-axis travel | mm | 560/1050 | |
| Tailstock travel | mm | 450 | |
| Tailstock quill taper | Morse 5# | ||
| Standard turret | Horizontal 8-station | ||
| OD tool | mm | 25×25 | |
| Boring bar diameter | mm | Φ20,25,32,40 | |
| Radom tool selection | yes | ||
| Machining accuracy | mm | IT6 | |
| Positioning accuracy(X/Z-axis) | mm | 0.008 | |
| Repeatability(X/Z-axis) | mm | 0.004 | |
| Roundness | mm | 0.0025/Ф75 | |
| Cylindricity | mm | 0.010/Ф150 | |
| Flatness | mm | 0.010/Ф200 | |
| Max. loading weight | Disc type | kg | 200 (incl. chuck) |
| (including clamping device) | Shaft type | kg | 500 (incl. chuck) |
| Machine weight | kg | 3900/4800 | |
| Overall dimensions of machine (L×W×H) | mm | 2750×1900×1900 3570×1900×1900 | |
